Products
-
Filter Paper Curing Oven
Translation: Mainly used for the heating and curing of the upper and lower covers of engine diesel, accelerating the bonding speed, thereby improving production efficiency.
1. The total length of the baking channel is 13 meters, the length of the baking channel is 10 meters, the length of the front conveyor line is 980mm, and the length of the rear conveyor line is 1980mm. 2. The conveyor belt is 800mm wide and the belt plane is 730±20mm above the ground. Frequency conversion speed regulation 0.5-1.5m/min, calculated at a height of 160mm. 3. Far infrared heating tube is used for heating, with a heating power of about 48KW and a total power of about 52KW. The preheating time in winter room temperature is no more than 40 minutes, and the temperature can be adjusted to 220°C. 4. There is a smoke exhaust device at the entrance and exit of the oven, with a power of 1.1KW*2. 5. The width of the mesh belt is 800mm and the effective width is 750mm. 6. The circulating fan and heater are interlocked for protection, and an over-temperature alarm is configured.
-
Thermal cotton machine
The machine is mainly suitable for Toyota environmental protection air filter hot and cotton folding.
- Product compatibility: 3psc/min
- width of elements: 380mm
- diameter of elements: 900mm
- main power: 0.46kw
- Working air pressure: 0.6mpa
- Power supply: 380v/50Hz
- M/C size: 1340×760×1470(L×W×H)
- Material dimension: 500×480×770(L×W×H)
- M/C weight: 200kg
-
Filter Element Heat Jointing Machine
This machine is used to heat jointing and forming the environment air filter element.
- Product compatibility: 70pcs /hour
- normal temp.~300℃: normal temp.~300℃
- Working air pressure: 0.8MPa
- Heating power: 6kw
- Power supply: 380V/50Hz
- M/C weight: 700kg
- M/C size: 1000×1050×2500mm(L×W×H)
-
Thermal cotton machine
The equipment is mainly used for cutting cotton fabrics, paper or other non-metallic materials of different shapes.
- Steroke speed: 0.008m/s
- Maximum cutting powre: 120KN
- Stamping control range: 5-60mm
- Height: 40-140mm
- Motor powre: 2.25kw
- Power supply: 380v/50hz
- Hydraulic oil capacity: 50L
- Rubber machine dimensions: 900×1000×1400mm(L×W×H)
-
Roll printing machine+curing oven
Used for printing patterns, text, and graphics on the side shell of the filter.
- Product effective diameter: φ60mm~φ110mm
- Product effective height: Product effective height
- Production speed: 40 pieces/minute
- Motor power: 4 kW (printing machine), 370 watts (light curing machine)
- Working air pressure: 0.6 MPa
- Power supply voltage: 220 volts/hertz
- Equipment weight: 2000 kg (printing machine) 1000 kg (light curing furnace)
- Dimensions: 2400*1000*1500 (mm) printing machine, 3200*600*1600 (mm) light curing furnace
-
Automatic outer sealing ring assembly machine(with oil oil sprayer)
Used for pressing the outer sealing ring on the filter chassis and oil spraying treatment of threaded holes.
- Product effective diameter: φmm~φmm
- Product effective height: mm~mm
- Effective diameter of sealing ring: mm
- Total power of equipment: 2.4 kW
- Production speed: 50 pieces/minute
- Working voltage: 220 volts/50 hertz
- Working air pressure: 0.6 MPa
- Machine weight: 300 kg
- Dimensions: 1300*2300*2000 (mm)
-
Filter paper curing oven
Translation: Mainly used for the heating and curing of the upper and lower covers of engine diesel, accelerating the bonding speed, thereby improving production efficiency.
1. The total length of the baking channel is 13 meters, the length of the baking channel is 10 meters, the length of the front conveyor line is 980mm, and the length of the rear conveyor line is 1980mm.
2. The conveyor belt is 800mm wide and the belt plane is 730±20mm above the ground. Frequency conversion speed regulation 0.5-1.5m/min, calculated at a height of 160mm.
3. Far infrared heating tube is used for heating, with a heating power of about 48KW and a total power of about 52KW. The preheating time in winter room temperature is no more than 40 minutes, and the temperature can be adjusted to 220°C.
4. There is a smoke exhaust device at the entrance and exit of the oven, with a power of 1.1KW*2.
5. The width of the mesh belt is 800mm and the effective width is 750mm.
6. The circulating fan and heater are interlocked for protection, and an over-temperature alarm is configured. -
Four-station cabin air filter automatic edge bonding machine
This machine is mainly used for automobile air conditioning filter production, can produce square automobile air conditioning filter element.
- Production efficiency: 30 pieces/minute
- Edge sticking mode: automatic adhesive
- Feeding mode: servo feeding
- Power: 6kw
- Power voltage: AC380V
- Machine weight: 1000kg
-
Semi-automatic edge bonding machine
This machine is mainly used for automobile air conditioning filter production, can produce square, shaped automobile air conditioning filter element.
- Speed control: frequency conversion speed regulation
- Feeding: servo feeding
- Power: 4kw
- Power voltage: AC220V
- Dimensions: 3880x1010x1100 (mm)
-
PVC rubber ring assembly machine（JR-PVC-4）
Used for welding automobile diesel PVC upper and lower end covers.
- Working diameter range: 40-120mm
- Working height range: 40-300mm
- Seven-station equipment: 1 person operation production
- Output: 150pcs/h
- Total power: 7KW
- Equipment weight: 300KGS
- Dimensions: 1450*600*1600mm
-
Automatic cutting and rolling machine(1000)
Used for cutting iron nets and curling them into a circle
- Design speed: 23m/min
- Working width: 1000mm
- Minimum roll diameter: 90mm
- Total power: 3KW
- Air pressure: 0.6Mpa
- Power supply: 380V/50HZ
- Equipment weight: 820KGS
- Dimensions: 2000mm*1500mm*1350mm
-
Car air filter cutting knife pleating machine
Polygonal paper blocks can be processed
12 servo motors control, automatically adjust the Angle of the receiving wheel
Paper receiving distance and height, automatic adjustment of tension
The blade cuts the shaped paper block, and the use of the blade reduces the cost and does not burn the paper
No smoke, higher efficiency and safety- Model：: ZZJ-6
- Production speed：: 80m/min
- Width of origami：: 400mm
- Folding height range: : 20--60mm
- Air pressure: : 0.6Mpa
- Temperature control: : 0-200℃
- Power: : 16KW
- Power supply: : 380V/50HZ
- Hot melt adhesive machine: : 30L
- Weight: : 1000kg
- Dimensions: : 2300*1000*1650mm 2400*1000*1900mm 2100*700*1100mm
-
Phone
-
E-mail
-
Whatsapp